What is an Hdpe board? In fact, this type of board is what we usually call high-density polyethylene, which is a semi transparent substance with high crystallinity. This substance can be made into some semi transparent boards. The main purpose of Hdpe board is to make some turnover boxes and food containers, with good thermoplastic properties. However, the disadvantage of Hdpe boards is that they are not particularly resistant to high temperatures and are prone to melting and deformation in high-temperature environments. Next, let's take a look at the quotation and introduction of the Hdpe board.

1、 Price The general price of Hdpe board is 20 one square meter (price source network, for reference only).

2、 What is an HDPE board High Density Polyethylene (HDPE), also known as low-pressure polyethylene, is a type of semi transparent material with high crystallinity and a certain degree of non polar surface. PE has excellent resistance to most household and industrial chemicals. HDPE is a thermoplastic resin with high crystallinity and non polarity. High density polyethylene is a white powder granular product that is non-toxic and odorless, with a density ranging from 0.940 to 0.976 g/cm3; The crystallinity is 80%~90%, the softening point is 125~135 ℃, and the operating temperature can reach 100 ℃; The melting temperature is 120-160 ℃. For materials with larger molecules, it is recommended to have a melting temperature range of 200-250 ℃.

Performance:

It has good heat and cold resistance, good chemical stability, high rigidity and toughness, and good mechanical strength. The dielectric performance and resistance to environmental stress cracking are also good. The hardness, tensile strength, and creep resistance are better than those of low-density polyethylene; Wear resistance, electrical insulation, toughness, and cold resistance are all good, but slightly inferior to low density insulation; Good chemical stability, insoluble in any organic solvent at room temperature, resistant to corrosion by acids, alkalis, and various salts; The film has low permeability to water vapor and air, and low water absorption; The aging resistance is poor, and the environmental cracking resistance is not as good as that of low-density polyethylene. Especially, thermal oxidation can cause its performance to decrease. Therefore, the resin needs to be added with antioxidants and ultraviolet absorbers to improve this deficiency. High density polyethylene film has a lower thermal deformation temperature under stress, which should be noted when applying.

3、 Main purpose

1. Injection molded products: including turnover boxes, bottle caps, barrels, caps, food containers, trays, trash cans, boxes, and plastic flowers

2. Blow molded products: Hollow shaped products, such as various series of blow molded barrels, containers, bottles, containers for storing cleaning agents, chemicals, cosmetics, gasoline tanks, daily necessities, etc. There are also blown film products such as food packaging bags, miscellaneous shopping bags, fertilizer lining films, etc.

3. Extruded products: Pipes and fittings are mainly used for gas transportation, public water and chemical transportation, such as building materials drainage pipes, gas pipes, hot water pipes, etc. Sheet materials are mainly used for seats, suitcases, handling containers, etc.

4. Rotary molding: Injection molded products such as large containers, storage tanks, barrels, boxes, etc.

5. Polyethylene can be processed into films, wire and cable sheaths, pipes, various hollow products, injection molded products, fibers, etc. Widely used in agriculture, packaging, electronics, machinery, automobiles, daily necessities, and other fields.

4. Manufacturer recommendation:

Since its establishment, Ole Packaging has always adhered to the corporate philosophy of green, ecological and environmental protection. Focusing on developing lightweight and affordable packaging materials to replace other bulky and environmentally friendly ones. Our main products include: container filled air bags, sliding pallets, paper pallets, plastic sliding pallets, paper corner protectors, and other export goods transportation packaging materials. We provide customers with high-quality, environmentally friendly, and economically practical products and services, omitting the tedious fumigation and quarantine procedures and accelerating export customs clearance!